A New Method to Determine the Steel Fibre Content of Existing Structures—Evaluation and Validation

Abstract

The in-situ measurement of the content and orientation of steel fibres in concrete structures is of great importance for the assessment of their specific mechanical properties, especially in the case of repair. For existing structures, the actual fibre content as well as the orientation of the fibres, which is based on many factors such as casting or compacting direction, is typically unknown. For structural maintenance or rehabilitation, those factors have to be determined in order to apply meaningful structural design calculations and plan necessary strengthening methods. For this reason, a new method based on the analysis of drilling cores of concrete structures has been established. The newly developed non-destructive test setup used in this research consists of a framework for cylindrical specimens in combination with an LCR meter to determine the electrical resistance of the fibre reinforced concrete. In combination with a suitable FEM model, concretes with fibre contents up 80 kg/m3 were analysed to derive a first model to assess the actual fibre content of steel fibre reinforced concretes. After a calibration of the literature’s equation by use of an adjusted aspect ratio for the analysis of drilling cores, the estimation of the fibre content is possible with high accuracy for the tested material combination. The results show that the newly developed test method is suitable for the rapid and non-destructive structural diagnosis of the fibre content of steel fibre reinforced concrete based on drilling cores using electrical resistivity measurements.

Keywords

• steel fibre reinforced concrete
• electrical resistivity
• fibre content
• non-destructive test method