The Post-Curing of Waterborne Polyurethane–Acrylate Composite Latex with the Dynamic Disulfide-Bearing Crosslinking Agent

Abstract

The development of a dynamic network for commodity polymer systems via feasible methods has been explored in the context of a society-wide focus on the environment and sustainability. Herein, we demonstrate an adaptive post-curing method used to build a self-healable network of waterborne polyurethane–acrylate (WPUA) composite latex. The composite latex was synthesized via the miniemulsion polymerization of acrylates in the dispersion of waterborne polyurethane (PU), with commercial acetoacetoxyethyl methacrylate (AAEM) serving as the functional monomer. Then, a dynamic disulfide (S–S)-bearing diamine was applied as the crosslinking agent for the post-curing of the hybrid latex via keto-amine condensation, which occurred during the evaporation of water for film formation. It was revealed that the microphase separation in the hybrid films was suppressed by the post-curing network. The mechanical performance exhibited a high reliability as regards the contents of the crosslinking agents. The reversible exchange of S–S bonds meant that the film displayed associative covalent-adaptive networks in the range of medium temperature in stress relaxation tests, and ≥95% recovery in both the stress and the strain was achieved after the cut-off films were self-healed at 70 °C for 2 h. The rebuilding of the network was also illustrated by the >80% recovery in the elongation at break of the films after three crushing–hot pressing cycles. These findings offer valuable insights, not only endowing the traditional WPUA with self-healing and reprocessing properties, but broadening the field of study of dynamic networks to polymer hybrid latex.

Keywords

• waterborne
• polyurethane–acrylate
• latex
• self-healing
• dynamic network