Study on Factors Influencing Film Formation of Grease and Calculation Model for Grease Film Thickness

Abstract

The grease film thickness was measured in fully flooded elastohydrodynamic lubrication, and the influence of rolling speed, load, consistency, base oil type and thickener type on grease film thickness was analyzed. A new calculation model for grease film thickness was established. The results show that the grease film thickness increases with the increasing rolling speed, and then levels off with the amount of thickener in the contact region reaching an equilibrium. The degree of grease film enhancement comparing to its base oil will depend on thickener type and consistency. The larger the atmospheric viscosity and pressure-viscosity coefficient of the base oil, the higher the film thickness of the greases with the same thickener. The grease film thicknesses with the same base oil and different thickeners are determined by the size of thickener particles at the same consistency or concentration. The larger the consistence of the grease, the larger the effective viscosity of the grease at the contact and the thicker the grease film thickness whose base oil has the same type and viscosity along with the same type of thickener. The calculated values by the new model are in good agreement with the measured values.

Keywords

• grease
• film-forming properties
• film thickness
• influence factor
• EHD