Modeling and Experimental Validation on Current Uniformity Characteristics of Parallel Spiral Structure Surge Arrester in ±550 kV DC GIS

Abstract

The employment of a multi-column parallel connection is intended to enhance the energy absorption capability and reliability of surge arresters. However, the disparity in reference voltage between each varistor column and the uneven current distribution may result in a reduction in performance or even failure of the surge arrester. The objective of this study is to investigate the spiral structure of a ±550 kV DC gas-insulated switchgear (GIS) parallel arrester and its influence on the current distribution characteristics. This research develops a model of a ±550 kV DC GIS arrester and performs an in-depth theoretical analysis using multi-physics field simulations. Subsequently, a ±66 kV miniature prototype is constructed, and the accuracy of the theoretical analysis and simulation results is validated by experiments, validating the effectiveness of the proposed method. This study calculates the self-generated inductance in the spiral structure of ZnO varistors using simulations. The influence of the self-generated inductance on the current distribution of the multi-column arrester when absorbing energy is further investigated. The results indicate that the self-generated inductance of the spiral structure can reduce the current deviation factor by 28–65%. This research provides a novel approach to improving current equalization in the parallel surge arresters of DC GISs for offshore wind power converter platforms.

Keywords

• gas-insulated switchgear
• surge arrester in parallel
• self-generated inductance
• current equalization characteristics