The Application of a Fisheye Lens in the Automatic Alignment of Wireless Optical Communication

Abstract

To achieve a lightweight design and wide field of view for the automatic alignment system in wireless optical communication, in the receiving antenna—a fisheye lens is incorporated as the receiving optical system. This feature enables the detection and tracking of lasers. The system utilizes a micro motor as the control servo system and a four-quadrant detector as the detection unit. Sequential and non-sequential ray tracing techniques were used to simulate the analysis of the fish-eye lens. Point array diagrams, ray trace diagrams, and encircled energy analysis were utilized to evaluate the spot’s quality. The simulation results demonstrate that the fish-eye lens has a field of view of 120°, and the spot with 80% energy has a diameter smaller than 30 μm. The experimental results indicate that the fish-eye lens effectively captures the light beam within the range of ±30°. The simulated and experimental results for the sum and difference frequency amplitudes show good agreement. The outdoor experiments have demonstrated a tracking error of 22.757 μrad in this system. After alignment, the average output optical power of the detector is 3.23 μW, and the detected waveform amplitude is 12.48 mV. These findings demonstrate the system’s potential for automatic alignment in wireless optical communication. Additionally, the system is relatively simple and practical.

Keywords

• wireless optical communication
• fisheye lens
• optical simulation
• four-quadrant detector