Heat‐Mitigated Design and Lorentz Force‐Based Steering of an MRI‐Driven Microcatheter toward Minimally Invasive Surgery

Abstract

Abstract Catheters integrated with microcoils for electromagnetic steering under the high, uniform magnetic field within magnetic resonance (MR) scanners (3–7 Tesla) have enabled an alternative approach for active catheter operations. Achieving larger ranges of tip motion for Lorentz force‐based steering have previously been dependent on using high power coupled with active cooling, bulkier catheter designs, or introducing additional microcoil sets along the catheter. This work proposes an alternative approach using a heat‐mitigated design and actuation strategy for a magnetic resonance imaging (MRI)‐driven microcatheter. A quad‐configuration microcoil (QCM) design is introduced, allowing miniaturization of existing MRI‐driven, Lorentz force‐based catheters down to 1‐mm diameters with minimal power consumption (0.44 W). Heating concerns are experimentally validated using noninvasive MRI thermometry. The Cosserat model is implemented within an MR scanner and results demonstrate a desired tip range up to 110° with 4° error. The QCM is used to validate the proposed model and power‐optimized steering algorithm using an MRI‐compatible neurovascular phantom and ex vivo kidney tissue. The power‐optimized tip orientation controller conserves as much as 25% power regardless of the catheter's initial orientation. These results demonstrate the implementation of an MRI‐driven, electromagnetic catheter steering platform for minimally invasive surgical applications without the need for camera feedback or manual advancement via guidewires. The incorporation of such system in clinics using the proposed design and actuation strategy can further improve the safety and reliability of future MRI‐driven active catheter operations.

Keywords

• active catheters
• Lorentz force
• magnetic resonance imaging
• medical robotics