Buildings (Jun 2024)
The Influence of the Aggressive Medium upon the Degradation of Concrete Structures: Numerical Model of Research
Abstract
This article discusses the impact of the aggressive environment on the pattern of pore distribution, strength, and mass absorption of investigated samples. For this purpose, a physical and numerical research model has been developed based on Fick’s second law and Zhurcov’s theory. Consequently, computer tomography research revealed that pore redistribution was revealed in test samples due to exposure. The degradation model is proposed assuming that in the first stage of interaction between concrete constructions and aggressive medium, the product of interaction is accumulated in the surface of structures and pores. Interaction products in the form of needle-shaped crystals grow in time and create additional stress in the body of the structure, resulting in partial distribution of the surface of the structure due to the growth. In this state, the excretion of dissolved substances (in the form of citrate and calcium acetate), leaching of Ca(OH)2, and decalcination of CSH lead to a decrease in the strength of cement stone. Based on the developed numerical models, the dependences of aggressive environment impact on the on the parameters of the structure of cement composites at different exposure times were obtained. For the samples obtained during the activation of Portland cement in the electromagnetic mill, energy parameters of the destruction process are 1.85–2.2 times heavier than the control compositions. The samples obtained by activating Portland cement in the electromagnetic mill have a higher susceptibility to an aggressive environment (they absorb 1.8 times more energy per unit of time for structure transformation). However, the higher U-energy barrier (1.85 times greater than the control composition) provides both a longer term of exploitation and a lower kinetics of the change in the strength of the material.
Keywords
