Unified description of different soils based on the superloading and subloading concepts

Abstract

Geotechnical engineering often involves different types of geomaterials, such as sandy soil and clayey soil. Existing studies have confirmed that these soils have some common features, i.e. their mechanical behaviors depend not only on the inherent characteristics but also on their initial states. To describe the main mechanical behaviors of different soils within a simple and reasonable constitutive framework is of great significance for the numerical analysis on geotechnical engineering. This paper first introduces a model based on the concepts of superloading and subloading, which considers the “state dependence” (effects of overconsolidation and structure) of soil and only adds two material parameters compared with the Cam-Clay model. Secondly, conventional triaxial tests are systematically carried out on four types of soils (i.e. sand, silty clay, clay, and intermediate soil) with different initial void ratios, and the mechanical similarities and differences of these soils are discussed uniformly. After that, six material parameters of these soils are uniformly determined based on the concepts of superloading and subloading, and then used in constitutive calculations to verify the feasibility. The calculated results show a good agreement with test data, indicating that the model based on the concepts of superloading and subloading has great potential for describing the general mechanical behaviors of different soils within a unified framework. This work is expected to be applied to constitutive selection and parameter determination in the geotechnical numerical analysis of complex soil profiles.

Keywords

• Elastoplastic behavior
• Constitutive model
• Sand
• Clay
• State dependence