Atmospheric Measurement Techniques (Oct 2023)

Irradiance and cloud optical properties from solar photovoltaic systems

  • J. Barry,
  • J. Barry,
  • S. Meilinger,
  • K. Pfeilsticker,
  • A. Herman-Czezuch,
  • N. Kimiaie,
  • C. Schirrmeister,
  • R. Yousif,
  • T. Buchmann,
  • J. Grabenstein,
  • H. Deneke,
  • J. Witthuhn,
  • C. Emde,
  • F. Gödde,
  • B. Mayer,
  • L. Scheck,
  • L. Scheck,
  • M. Schroedter-Homscheidt,
  • P. Hofbauer,
  • M. Struck

DOI
https://doi.org/10.5194/amt-16-4975-2023
Journal volume & issue
Vol. 16
pp. 4975 – 5007

Abstract

Read online

Solar photovoltaic power output is modulated by atmospheric aerosols and clouds and thus contains valuable information on the optical properties of the atmosphere. As a ground-based data source with high spatiotemporal resolution it has great potential to complement other ground-based solar irradiance measurements as well as those of weather models and satellites, thus leading to an improved characterisation of global horizontal irradiance. In this work several algorithms are presented that can retrieve global tilted and horizontal irradiance and atmospheric optical properties from solar photovoltaic data and/or pyranometer measurements. The method is tested on data from two measurement campaigns that took place in the Allgäu region in Germany in autumn 2018 and summer 2019, and the results are compared with local pyranometer measurements as well as satellite and weather model data. Using power data measured at 1 Hz and averaged to 1 min resolution along with a non-linear photovoltaic module temperature model, global horizontal irradiance is extracted with a mean bias error compared to concurrent pyranometer measurements of 5.79 W m−2 (7.35 W m−2) under clear (cloudy) skies, averaged over the two campaigns, whereas for the retrieval using coarser 15 min power data with a linear temperature model the mean bias error is 5.88 and 41.87 W m−2 under clear and cloudy skies, respectively. During completely overcast periods the cloud optical depth is extracted from photovoltaic power using a lookup table method based on a 1D radiative transfer simulation, and the results are compared to both satellite retrievals and data from the Consortium for Small-scale Modelling (COSMO) weather model. Potential applications of this approach for extracting cloud optical properties are discussed, as well as certain limitations, such as the representation of 3D radiative effects that occur under broken-cloud conditions. In principle this method could provide an unprecedented amount of ground-based data on both irradiance and optical properties of the atmosphere, as long as the required photovoltaic power data are available and properly pre-screened to remove unwanted artefacts in the signal. Possible solutions to this problem are discussed in the context of future work.