Parameter Identification Method of a Double-Layer Supercapacitor by Using a Real Voltage Source

Abstract

This article presents a new method for obtaining the electrical parameters of a supercapacitor (SC) modeled as a constant resistor in series with a capacitance that linearly varies with its internal voltage. This model provides sufficiently accurate results when the SC is subjected to rapid, short-term charging and discharging. In other methods described in the literature, the parameters are obtained by charging or discharging the SC with a constant current source of high value. In this study, the electrical parameters are calculated by charging or discharging the cell with a real constant voltage source (RVS) or by discharging the SC through a known and constant resistance. The calculation procedure requires the measurement of the cell voltage as a function of time. Two alternative estimation methods have been employed: the three-point method (3PM) and the least squares method (LSM). A series of experimental tests were conducted on cells from various manufacturers, with capacitances ranging from 150 F to 600 F. The laboratory measurements were then compared with the results obtained from theoretical models incorporating the parameters obtained for the variable capacity model. The results demonstrated that this straightforward procedure is capable of accurately characterizing the main branch of any SC.

Keywords

• electrical parameters estimation
• model validation
• supercapacitors
• voltage source