Consequences of Deep Rolling at Elevated Temperature on Near-Surface and Fatigue Properties of High-Manganese TWIP Steel X40MnCrAl19-2

Abstract

Due to pronounced work-hardening induced by the complex interplay of deformation mechanisms such as dislocation slip, twinning and/or martensitic phase transformation, high-manganese steels represent a class of materials well-suited for mechanical surface treatment. In the present study, the fatigue behavior of a high-mangsanese steel showing twinning-induced plasticity (TWIP) effect at room temperature (RT) was investigated after deep rolling at 550 °C. Results are compared to a former study discussing the behavior after RT deep rolling. Evolution of the near-surface microstructure was analyzed by scanning electron microscopy (SEM), microhardness measurements and residual stress depth profiles obtained by X-ray diffraction (XRD). Both uniaxial tensile tests and uniaxial tension-compression fatigue tests have been conducted in order to rationalize the macroscopic material behavior. Following deep rolling at 550 °C, SEM measurements employing electron backscatter diffraction (EBSD) revealed a heavily deformed surface layer as well as localized deformation twinning. Specimens showed inferior hardness and residual stress depth profiles when compared to RT deep rolled counterparts. Tensile tests indicated no difference between the conditions considered. Fatigue properties however were improved. Such behavior is rationalized by a more stable residual stress state induced by dynamic strain aging.

Keywords

• high-manganese steel
• deep rolling
• TWIP
• near-surface properties
• residual stresses
• residual stress stability