Thermodynamic Modelling of Iron Ore Sintering Reactions

Abstract

Silico-ferrite of calcium and aluminum (SFCA) is one of the most commonly-produced phases in fluxed iron-ore sintering, and has long been regarded as an important bonding phase in industrial sinters. It is thus considered to have a significant effect on sinter quality. In this study, a solid solution model and database has been developed for the SFCA phase, and has been incorporated into the thermodynamic software, Multi-Phase Equilibrium (MPE). MPE calculations were compared with the in situ X-ray powder diffraction (XRD) observations of the formation of SFCA phase during sintering. The effects of the raw material composition, temperature and the oxygen partial pressure on the formation of mineral phases in the sinter, as well as the viscosity of the melt formed during sintering under equilibrium conditions, were modelled using MPE. The results show that the formation of SFCA phase can be promoted by increasing oxygen partial pressure and basicity of the raw material. Increases of Al2O3 and MgO content have no significant effect on the SFCA formation under equilibrium condition. The increase of oxygen partial pressure (10−3 atm or above) and basicity also leads to a decrease in melt viscosity, which enhances the fluidity of the melt, and hence, the assimilation of the sinter. However, increases of Al2O3 and MgO result in the increase of melt viscosity.

Keywords

• thermodynamic modelling
• iron ore sinter
• SFCA
• calcium ferrite
• oxygen partial pressure
• mineral phases
• viscosity