Polymer-assisted synthesis of ternary magnetic graphene oxide nanocomposite for the adsorptive removal of Cr(VI) and Pb(II) ions

Abstract

The presence of chromium [Cr(VI)] and lead [Pb(II)] ions in the water bodies have adverse effects on humans and aquatic life. Graphene oxide-based magnetic nanocomposites synthesized in the presence of chitosan (mGO/CS) or polyaniline (mGO/PA) as potential adsorbents for the removal of Cr(VI) and Pb(II) ions. The FTIR (Fourier transform infrared spectroscopy), EDX (Energy dispersive X-ray), XRD (X-ray diffraction) and SEM (Scanning electron microscopy) were employed to investigate the chemical composition, structural, elemental analysis, crystalline size and morphology of the nanocomposites. The FTIR results confirmed the synthesis of the nanocomposites by detecting peaks of specific functional groups. The average crystallite sizes of the mGO, mGO/CS, and mGO/PA nanocomposites were 17, 25, and 23 (nm), respectively, as determined by the Debye-Scherrer equation from the XRD data. Batch adsorption experiments were conducted for Pb(II) and Cr(VI) removal by varying the variables like pH, concentration of metal ions and contact time. The Box Behnken design (BBD) was used to optimize the adsorption parameters. Under the optimum conditions, mGO/CS and mGO/PA showed maximum removal percentages (%R) of 92.36 and 98.7 for Pb(II), and 85.25 and 93.08 for Cr(VI), respectively. The adsorption capacities were 110.84 and 118.44 mg/g for Pb(II), and 87.74 and 111.7 mg/g for Cr(VI) were obtained for mGO/CS and mGO/PA, respectively. The pseudo-second-order kinetic model and Langmuir isotherm fitted well to the experimental data and explain the adsorption mechanism of the nanocomposite materials for both metal ions.

Keywords

• Graphene oxide
• Polymers
• Chitosan
• Polyaniline
• Fe3O4
• Nanocomposite