Effect of κ Carbides on Deformation Behavior of Fe-27Mn-10Al-1C Low Density Steel

Abstract

Fe-Mn-Al-C steel, which is a potential lightweight material for automobiles, has a variety of microstructures and good mechanical properties. The effect of κ carbides on the mechanical properties and strain hardening rate of Fe-27Mn-10Al-1C (wt.%) low density steel was studied by short-time heat treatment to control the precipitation behavior of κ carbides. Quenched specimens have an excellent combination of strength and plasticity and continuous high strain hardening rate, which is due to the uniform distribution of κ carbides with an average size of 1.6 nm in an austenite matrix. The fracture mode of the sample changed from ductile fracture to cleavage fracture, which was because the aging treatment promoted the precipitation of B2 phases and κ carbides at grain boundaries. The size and volume fraction of nanoscale κ carbides in austenite grains increase with the increase of aging temperature, and the yield strength increases but the density of slip bands decreases, resulting in the gradual decrease of strain hardening rate.

Keywords

• Fe-Mn-Al-C steel
• short-time heat treatment
• κ carbides
• strain hardening
• plane slip