An Investigation of Globe Temperature in Street Canyons: A Scaled Model Study Implementing Cool Materials

Abstract

The measurement of globe temperature (GT) is essential for investigating pedestrian thermal comfort in street canyons. The globe thermometer is the most common instrument used to measure GT; however, its application in scale models has not been thoroughly investigated to date. Therefore, this study explicitly investigates globe thermometer measurements in scale models and analyzes the need for customization of the globe thermometer for more reliable measurements. Scaling down with respect to the size of the globe thermometer and the effect of solar orientation/envelope materials are investigated in this study. The initial experiments were carried out in an outdoor setting using a typical street canyon model (scale 1:100) with an east-west street orientation. The results of the experiment are presented to compare a low solar reflectance street canyon (albedo of 0.4) and a high solar reflectance canyon (albedo of 0.6) in terms of surface temperatures, heat flux, and globe temperature. It is observed that although the wall and road surface temperatures are lower for the high solar reflectance canyon compared to those for the low solar reflectance canyon, the GT (measured at pedestrian height) is higher in a high reflectance canyon during the daytime, which could be due to the combined effect of direct radiation and short-wave reflection. However, for the hours after sunset, a reverse effect is observed, i.e., the GT becomes lower (up to 0.8 °C) in the case of a high reflectance canyon compared to that for the low reflectance canyon. Furthermore, the study emphasizes the impact of solar reflectance of canyon surfaces on GT values, due to the view factors that the globe thermometer on those surfaces.

Keywords

• street canyon
• globe temperature
• heat capacitance
• cool materials