Energies (Jan 2024)
Relative Comparison of Benefits of Floor Slab Insulation Methods, Using Polyiso and Extruded Polystyrene Materials in South Africa, Subject to the New National Building Energy Efficiency Standards
Abstract
This article aims to assess the benefits of floor slab insulation measures using extruded polystyrene (XPS) and polyisocyanurate (also referred to as polyiso or PIR) insulation materials at various levels of insulation thicknesses for a detached residential building. An EnergyPlus simulation analysis was carried out within the seven energy zones (represented by eight locations) of South Africa in accordance with the South African national code for building energy efficiency (SANS10400-XA). The energy savings and payback periods related to the use of the insulation over a lifecycle period of 50 years were assessed. Cape Town (zone 4) behaved differently from other locations and hardly benefited from the application of floor slab insulation measures. Generally, polyiso (PIR) insulation performed better than XPS for vertical gap insulation, and lower insulation thicknesses required higher insulation depths to maximize energy savings. Similarly, lower insulation thicknesses (25 mm and 50 mm) required higher perimeter insulation widths to maximize energy savings for horizontal perimeter insulation, especially in Sutherland (zone 6) and Cape Town. The maximization of energy savings was also achieved at low insulation thickness for the full floor slab insulation method, except for Sutherland and Fraserburg (zone 7). The locations that benefitted most from the floor slab insulation methods were Pretoria (zone 5), Thohoyandou (zone 3), Sutherland (zone 6), Fraserburg (zone 7), Welkom (zone 1), Ixopo (zone 5H), Witbank (zone 2), and Cape Town (zone 4), in that order. Generally, higher net energy savings are achieved in areas with lower humidity levels and areas with greater annual sums of both cooling and heating degree days.
Keywords
