An Experimental Investigation on the Foliation Strike-Angle Effect of Layered Hard Rock under Engineering Triaxial Stress Path

Abstract

Deep underground engineering encounters substantial layered hard rock formations, and the engineering triaxial stress path involves an increase in maximum principal stress, constant intermediate principal stress, and a decrease in minimum principal stress. However, previous research has focused on rock layer angles under conventional triaxial stress conditions, disregarding the influence of foliation strike angles in engineering triaxial stress scenarios. This study experimentally investigates the effects of foliation strike angles on layered hard rock under an engineering triaxial stress path. To account for the brittleness of layered hard rock, we propose a specific small sample-processing method tailored to the foliation strike angle. True triaxial loading tests are conducted on steep, thin slate samples with two different loading orientations, accompanied by acoustic emission monitoring. Results indicate that the strength under a traditional true triaxial compression condition is similar for specimens with 90° and 0° strike angles. Stress–strain curves show that larger deformations occur perpendicular to bedding planes, while surface fractures propagate exclusively along the bedding planes. Mechanical responses differ significantly between specimens subjected to the engineering triaxial stress path at 0° and 90° strike angles compared to conventional true triaxial loading tests, with a lower bearing capacity and differentiated intermediate and minimum principal strains in the 0° case. Conversely, the 90° case exhibits a higher bearing capacity, consistent deformation, and more acoustic emission events. Numerical simulations comparing plastic zone sizes during actual underground excavation support these conclusions. These findings highlight the effects of foliation strike angles, favoring the 90° strike-angle configuration for excavation activities and providing enhanced stability in the surrounding rock mass.

Keywords

• layered rock
• strike angle
• foliation
• true triaxial stress
• anisotropy