Thermal Behavior of a Building with Incorporated Phase Change Materials in the South and the North Wall

Abstract

Energy consumption in the building sector is responsible for a very large amount of electricity consumption worldwide. The reduction of this consumption is a crucial issue in order to achieve sustainability. The objective of this work is to investigate the use of phase change materials (PCMs) in the building walls in order to reduce the heating and the cooling loads. The novelty of this work is based on the investigation of different scenarios about the position of the PCM layer in the south and the north walls. PCMs can improve the thermal performance and the thermal comfort of a building due to their ability to store large amounts of thermal energy in latent form and so to reduce the temperature fluctuations of the structural components, keeping them within the desired temperature levels. More specifically, this work presents and compares the heating loads, the cooling loads and the temperature distribution of a building in Athens (Greece), with and without PCMs in different positions in the south wall and in the north walls. The simulation is performed with the commercial software TRNSYS 17, using the TRNSYS component: type 1270 (PCM Wall). The results proved that the maximum energy savings per year were achieved by the combination of the insulation and the PCM layer in the north and south walls. More specifically, the reductions in the heating and the cooling loads were found to be 1.54% and 5.90%, respectively. Furthermore, the temperature distribution with the use of a PCM layer is the most acceptable, especially during the summer period.

Keywords

• phase change materials
• building thermal behavior
• TRNSYS
• heating-cooling loads