Polymers (Jul 2020)
Synthesis and Preparation of (Acrylic Copolymer) Ternary System Peelable Sealing Decontamination Material
Abstract
Traditional methods that are used to deal with radioactive surface contamination, which are time-consuming and expensive. As one effective measure of radioactive material purification, strippable coating, which effectively coats the pollutant, and settles them on the surface of objects. However, there are some shortcomings in terms of film formation and peelability, such as a brittle coating and poor peelability. Therefore, in order to meet the treatment methods for radioactive contaminants needs, the strippable coating must have excellent sealing, corrosion resistance, weather resistance, low environmental pollution, short film formation time, and good mechanical properties; in addition, the spraying process should be simple, with moderate adhesion, and it should be capable of being quickly and completely peeled off. In this paper, a ternary system was prepared by pre-emulsion polymerization with butyl-acrylate, methyl methacrylate, acrylic acid as the reactive monomer, sodium dodecyl sulfate as the active agent, potassium persulfate as the initiator, and water as the dispersion medium. The Fourier-transform infrared (FTIR) spectroscopy, nuclear magnetic resonance (1H-NMR), ICP emission spectrometer, surface tension tester, and universal testing machine were used to characterize the structure and morphology of the composite materials. The results show that the decontaminant can quickly wet the powder particles and the surface pollutants. The sealing efficiency of Fe and Cu was over 90%. After the decontaminant was cured, it could be continuously formed on the surface of different substrates and be completely peeled off, as well as having excellent film formation and peelability.
Keywords