China Foundry (Aug 2006)

Microstructure and properties of M g-Li-A lalloys with Mn addition

  • Li Hong-bin,
  • Yang Guang-chun,
  • Liang Chun-lin

Journal volume & issue
Vol. 3, no. 3
pp. 204 – 207

Abstract

Read online

Mg-xLi-Al alloys with Mn addition from 0.2% to 1.5% by wt. were produced and studied. The density of the alloys is very low , betw een 1.21 g/cm3 and 1.64 g/cm3, while the microstructures change from single α-,(α+β)-,to single β-phase with lithium contentrising from 5% to 22% by wt.The m ain alloy studied w as LA 92 alloy with Mn addition. The results ofthe tensile tests show that the strength decreases with increasing lithium content, while the elongation increases sharply,and the U TS and Y S rise by 26.8% and 22.7% respectively,when 0.5% by wt. Mn is added.It is also known,by microstructure observation,SEM with EDS and X-ray analysis,that adding Mn can produce som e new hard phases in the alloy, which may worsen the tensile properties.

Keywords