Stability Analysis of Concrete Block Anchor on Steep-Slope Floating Breakwater

Abstract

The floating breakwater is a protective structure that can absorb waves and can be used effectively in coastal areas with moderate wave environmental conditions. The stability of the floating breakwater is affected by the tension of the mooring line and the weight of the anchor. This research was conducted experimentally with a model scale of 1:10 on a floating breakwater with mooring systems and concrete anchor blocks with three types of configurations. The experiment was carried out on irregular waves with the following variations: wave height and period, mooring angle, structure width, and anchor weight. The results of this study indicate that at a wave steepness of 0.02–0.025 floating breakwater, which is installed with a mooring angle of 45 deg, configuration 3 has the largest stability parameter among other configurations. However, if the structure is installed at a mooring angle of 90 deg and cross, configurations 2 and 3 have almost the same stability. The test results also show that the relative width will affect the stability parameters. Configuration 3 (B = 30 cm) has the largest stability-parameter value among other configurations (B = 10 cm and 20 cm).

Keywords

• floating breakwater
• mooring
• concrete block anchor
• technology