Innovative Method for the Mass Preparation of α″-Fe₁₆N₂ Powders via Gas Atomization

Abstract

The iron nitride materials, especially α″-Fe16N2, are considered one of the most promising candidates for future rare-earth-free magnets. However, the mass production of α″-Fe16N2 powders as a raw material for permanent magnets is still challenging. In this work, starting from iron lumps as a raw material, we have managed to prepare the α″-Fe16N2 powders via the gas atomization method, followed by subsequent nitriding in an ammonia–hydrogen gas mixture stream. The particle size was controlled by changing the gas atomization preparation conditions. X-ray diffractograms (XRD) analyses show that the prepared powders are composed of α″-Fe16N2 and α-Fe phases. The α″-Fe16N2 volume ratio increases with decreasing powder size and increasing nitriding time, reaching a maximum of 57% α″-Fe16N2 phase in powders with size below 32 ± 3 μm after 96 h nitridation. The saturation magnetization reaches the value of 237 emu/g and a reasonable coercivity value of 884 Oe. Compared to the saturation magnetization values of α-Fe powders, the α″-Fe16N2 powders prepared through our proposed approach show an increase of up to 10% in saturation and demonstrate the possibility of mass production of α″-Fe16N2 powders as precursors of permanent magnets without rare earths.

Keywords

• Fe₁₆N₂ powder
• nitridation
• gas atomization
• magnetic properties
• X-ray diffraction