Study of the contact angle and roughness effects on mercury intrusion porosimetry (MIP) analysis in natural/real carbonate rocks using massive pure minerals and synthetic carbonate rocks

Abstract

Studying pore networks in rocks is critical for understanding reservoir properties, with mercury intrusion porosimetry (MIP) being a key laboratory method. MIP involves capillary intrusion of mercury, with intrusion pressure (P) related to capillary diameter (d) by the Washburn equation, incorporating mercury properties like contact angle (θ) and surface tension (γ). While a constant contact angle of 140° is typically assumed for MIP, it can vary based on rock mineralogy and surface roughness. This study aims to analyze how contact angle variations and surface roughness affect MIP analysis of carbonate rocks. Initially, contact angle data was obtained for calcite, dolomite, and quartz with varying roughness levels. Synthetic rocks were then constructed using these minerals. MIP was performed using the typical 140° contact angle and a calculated contact angle from the Cassie model, which considers surface composition fraction. Natural rock MIP analysis followed, with contact angles varying due to mineral composition and roughness. The study found higher contact angles than the standard 140°, affecting pore size distributions up to 30%. Natural rock pore network curves were adjusted based on synthetic rock data analysis. These findings emphasize the need for accurate contact angle selection in MIP for precise pore distribution analysis and contribute to the further study of carbonate rocks.

Keywords

• Pore networks
• Mercury intrusion porosimetry
• Contact angle
• Carbonate rocks
• Synthetic rocks