Development of Porous Pt Electrocatalysts for Oxygen Reduction and Evolution Reactions

Abstract

Porous Pt electrocatalysts have been developed as an example of carbon-free porous metal catalysts in anticipation of polymer electrolyte membrane (PEM) fuel cells and PEM water electrolyzers through the assembly of the metal precursor and surfactant. In this study, porous Pt was structurally evaluated and found to have a porous structure composed of connected Pt particles. The resulting specific electrochemical surface area (ECSA) of porous Pt was 12.4 m2 g−1, which was higher than that of commercially available Pt black. Accordingly, porous Pt showed higher oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) activity than Pt black. When the activity was compared to that of a common carbon-supported electrocatalyst, Pt/ketjen black (KB), porous Pt showed a comparable ORR current density (2.5 mA cm−2 at 0.9 V for Pt/KB and 2.1 mA cm−2 at 0.9 V for porous Pt), and OER current density (6.8 mA cm−2 at 1.8 V for Pt/KB and 7.0 mA cm−1 at 1.8 V), even though the ECSA of porous Pt was only one-sixth that of Pt/KB. Moreover, it exhibited a higher durability against 1.8 V. In addition, when catalyst layers were spray-printed on the Nafion® membrane, porous Pt displayed more uniform layers in comparison to Pt black, showing an advantage in its usage as a thin layer.

Keywords

• oxygen reduction
• oxygen evolution
• PEM fuel cell
• PEM water electorolyzer
• durability
• porous structure