Boosted brackish water desalination and water softening by facilely designed MnO2/hierarchical porous carbon as capacitive deionization electrode

Abstract

Capacitive deionization (CDI) is a promising technique for brackish water desalination. However, its salt electrosorption capacity is insufficient for practical application yet, and little information is available on hardness ion (Mg2+, Ca2+) removal in CDI. Herein, hierarchical porous carbon (HPC) was prepared from low-cost and renewable microalgae via a simple one-pot approach, and both MnO2/HPC and polyaniline/HPC (PANI/HPC) composites were then synthesized using a facile, one-step hydrothermal method. Compared with the MnO2 electrode, the MnO2/HPC electrode presented an improved hydrophilicity, higher specific capacitance, and lower electrode resistance. The electrodes exhibited pseudocapacitive behaviors, and the maximum salt electrosorption capacities of MnO2/HPC-PANI/HPC CDI cell was up to 0.65 mmol g−1 NaCl, 0.71 mmol g−1 MgCl2, and 0.76 mmol g−1 CaCl2, respectively, which were comparable and even higher than those of the previously reported CDI cells. Additionally, the MnO2/HPC electrode presented a selectivity order of Ca2+ ≥ Mg2+ > Na+, and the divalent cation selectivity was found to be attributed to their stronger binding strength in the cavity of MnO2. Multiscale simulations further reveal that the MnO2/HPC electrodes with the unique luminal configuration of MnO2 and HPC as supportive framework could offer a great intercalation selectivity of the divalent cations and exhibit a great promise in hardness ion removal.

Keywords

• Hierarchical porous carbon
• Manganese dioxides
• Brackish water desalination
• Divalent cation selectivity
• Multiscale simulation