Experimental study of thermal performance in a rectangular finned-tube latent heat storage device with composite polyethylene wax/expanded graphite

Abstract

Phase change materials and geometric structure of latent heat storage (LHS) devices constitute crucial factors affecting the performance of phase change thermal energy storage systems. In this study, focusing on the LHS system with a heat source temperature of 150 °C, a rectangular finned-tube latent heat storage device was designed and fabricated. Polyethylene wax (PEW) with a 10% mass fraction of expanded graphite was adopted to prepare the composite phase change material. A series of experiments was conducted to evaluate the thermodynamic performance of the device with varying inlet temperatures and mass flow rates. The experimental results showed that the process of heat storage and release was predominantly governed by thermal conduction due to the high viscosity of PEW. Although the temperature variations in various directions within the LHS device remain nearly consistent, the heat transfer in the non-fin regions on the rectangular LHS device walls and corners was comparatively inferior due to the absence of natural convective heat transfer. In comparison to the mass flow rate, the inlet temperature exerts a more significant impact on accelerating the heat storage/release processes. While an increase in the mass flow rate enhanced the heat transfer capacity, its slightly accelerates the heat transfer duration. Moreover, the heat release ratio of the device exhibits an initial increase followed by a decrease with an increasing mass flow rate. In practical applications, prioritizing an increase in inlet temperature difference proves to be more effective than adjusting mass flow rate to enhance the heat storage performance.

Keywords

• Latent heat storage
• Finned-tube heat exchanger
• Expanded graphite
• Thermal performance
• Experimental study