Arhiv za farmaciju (Jan 2023)
Design of Experiments (DoE)-based approach for improvement of dry mixing processes in the production of low-dose Alprazolam tablets using Raman spectroscopy for content uniformity monitoring
Abstract
A low-dose tablet formulation, containing a potent Benzodiazepine derivative Alprazolam was developed, considering the achievement of appropriate content uniformity of the active substance in powder blends and tablets as a major challenge. Two different types of lactose monohydrate (Tablettose 80 and Granulac 200) and two different types of dry mixing processes (high-shear mixing and "in bulk" mixing) were employed. To evaluate the influence of the variables (mixing speed, mixing time, filling level of the high-shear and cube mixer, lactose monohydrate type) and their interactions upon the response (content uniformity of Alprazolam in the powder blends), a Factorial 2 4 design (with 4 factors at 2 levels in 1 block) was generated for each type of mixer. For high-shear dry mixing the Response Surface, D-optimal Factorial 2 4 design (with 2 replications and 31 experiments) was used, while for the "in bulk" dry mixing the Response Surface, Central Composite Factorial 2 4 design (with 34 experiments) was used. The process parameters for the high-shear mixer were varied within the following ranges: filling level of 70-100%, impeller mixing speed of 50-300 rpm and mixing time of 2-10 minutes. For the cube mixer the following process parameter ranges were employed: filling level of 30-60%, mixing speed of 20-390 rpm and mixing time of 2-10 minutes. Raman spectroscopy in conjunction with a validated Partial Least Square (PLS) regression model was used as a Process Analytical Technology (PAT) tool for Alprazolam content determination and content uniformity monitoring. The DoE model was further employed to optimize the powder blending process in regard to the achievement of appropriate Alprazolam content uniformity using high-shear mixing and Tabletosse 80 as filler. The desirability function revealed that the following process parameters: a mixing time of 2 minutes, a mixing speed of 300 rpm and a 70% filling level of the mixer would produce powder blends with the lowest variability in Alprazolam content. The three independent lab batches of low-dose Alprazolam tablets, produced with high-shear mixing using these process parameters, conformed to the requirements of the European Pharmacopoeia for content (assay) of Alprazolam and uniformity of the dosage units.
