Influence of Niobium Addition on Microstructure and Machinability of High Chromium Cast Iron

Abstract

Abstract High Chromium Cast Iron (HCCI) is mostly utilised in environments under severe abrasion and corrosion wear conditions, and research on this material with added niobium obtained positive results regarding wear resistance. The casting process has surface finish and dimensional accuracy limitations compared to machining processes. There are too few studies about HCCI machinability and no one about HCCI with niobium additions. HCCI machinability studies may allow new applications for this material when excellent surface finish and high dimensional accuracy are required. This study analyses the influence of 0.5% Nb addition on the microstructure and machinability of a HCCI alloy with 25.6% Cr and 3.2% C. The samples were heat treated and subsequently machined in dry cutting conditions. Annealing was used to facilitate the pre-machining of the samples, which were later quenched and tempered. Microstructure and hardness were analysed at each stage of the heat treatment. The material was machined after tempered using polycrystalline cubic boron nitride (pcBN) tools. The alloys solidified in the hypereutectic condition. The addition of niobium reduced the hardness and carbide volumetric fraction, increased the service life of the cutting tools in all tests, provided better surface finishing and modified the wear mechanisms.

Keywords

• Machining
• High Chromium Cast Iron (HCCI)
• Niobium
• pcBN tool
• Wear mechanisms
• Tool service life