Study on annular pressure buildup phenomenon in subsea wells considering the effect of cement

Abstract

Abstract In marine fossil energy production, annular pressure buildup (APB) caused by temperature increase is a widely concerned problem and needs to be solved urgently in subsea wells. To study and predict APB and avoid consequent safety accidents and economic losses, a novel model is proposed to predict APB considering the effect of cement. The model has a wider application range by considering the dynamic change of thermal properties and mass change of the annular fluid. Laboratory experiments were conducted to verify the accuracy of the proposed model. Then a case study and mitigation evaluation were conducted to make the further analysis. Research results show that cement has a significant effect on APB, ignoring the cement may bring potential danger. The height of cement affects APB differently when the top of cement (TOC) is above and below the previous casing shoes. Making the TOC below the previous casing shoe could provide a leakage surface for annular fluid. It is an effective method for APB mitigation but a balance needs to be struck between wellbore integrity and mitigation effect. Gas or foam injection is another effective method to mitigate APB. The necessary gas volume varies with the annular pressure and initial gas pressure and needs to be determined according to the actual condition, especially in deepwater wells.

Keywords

• annular pressure buildup
• cement
• deepwater
• experiment
• fossil energy