APL Materials
(Apr 2023)
Silicon-doped β-Ga2O3 films grown at 1 µm/h by suboxide molecular-beam epitaxy
Kathy Azizie,
Felix V. E. Hensling,
Cameron A. Gorsak,
Yunjo Kim,
Naomi A. Pieczulewski,
Daniel M. Dryden,
M. K. Indika Senevirathna,
Selena Coye,
Shun-Li Shang,
Jacob Steele,
Patrick Vogt,
Nicholas A. Parker,
Yorick A. Birkhölzer,
Jonathan P. McCandless,
Debdeep Jena,
Huili G. Xing,
Zi-Kui Liu,
Michael D. Williams,
Andrew J. Green,
Kelson Chabak,
David A. Muller,
Adam T. Neal,
Shin Mou,
Michael O. Thompson,
Hari P. Nair,
Darrell G. Schlom
Affiliations
Kathy Azizie
Department of Materials Science and Engineering, Cornell University, Ithaca, New York 14853, USA
Felix V. E. Hensling
Department of Materials Science and Engineering, Cornell University, Ithaca, New York 14853, USA
Cameron A. Gorsak
Department of Materials Science and Engineering, Cornell University, Ithaca, New York 14853, USA
Yunjo Kim
Air Force Research Laboratory, Materials and Manufacturing Directorate, Wright Patterson Air Force Base, Ohio 45433, USA
Naomi A. Pieczulewski
Department of Materials Science and Engineering, Cornell University, Ithaca, New York 14853, USA
Daniel M. Dryden
Air Force Research Laboratory, Sensors Directorate, Wright Patterson Air Force Base, Ohio 45433, USA
M. K. Indika Senevirathna
Department of Physics, Clark Atlanta University, Atlanta, Georgia 30314, USA
Selena Coye
Department of Physics, Clark Atlanta University, Atlanta, Georgia 30314, USA
Shun-Li Shang
Department of Material Science and Engineering, Pennsylvania State University, University Park, Pennsylvania 16802, USA
Jacob Steele
Department of Materials Science and Engineering, Cornell University, Ithaca, New York 14853, USA
Patrick Vogt
Department of Materials Science and Engineering, Cornell University, Ithaca, New York 14853, USA
Nicholas A. Parker
Department of Materials Science and Engineering, Cornell University, Ithaca, New York 14853, USA
Yorick A. Birkhölzer
Department of Materials Science and Engineering, Cornell University, Ithaca, New York 14853, USA
Jonathan P. McCandless
School of Electrical and Computer Engineering, Cornell University, Ithaca, New York 14853, USA
Debdeep Jena
Department of Materials Science and Engineering, Cornell University, Ithaca, New York 14853, USA
Huili G. Xing
Department of Materials Science and Engineering, Cornell University, Ithaca, New York 14853, USA
Zi-Kui Liu
Department of Material Science and Engineering, Pennsylvania State University, University Park, Pennsylvania 16802, USA
Michael D. Williams
Department of Physics, Clark Atlanta University, Atlanta, Georgia 30314, USA
Andrew J. Green
Air Force Research Laboratory, Sensors Directorate, Wright Patterson Air Force Base, Ohio 45433, USA
Kelson Chabak
Air Force Research Laboratory, Sensors Directorate, Wright Patterson Air Force Base, Ohio 45433, USA
David A. Muller
Kavli Institute at Cornell for Nanoscale Science, Ithaca, New York 14853, USA
Adam T. Neal
Air Force Research Laboratory, Materials and Manufacturing Directorate, Wright Patterson Air Force Base, Ohio 45433, USA
Shin Mou
Air Force Research Laboratory, Materials and Manufacturing Directorate, Wright Patterson Air Force Base, Ohio 45433, USA
Michael O. Thompson
Department of Materials Science and Engineering, Cornell University, Ithaca, New York 14853, USA
Hari P. Nair
Department of Materials Science and Engineering, Cornell University, Ithaca, New York 14853, USA
Darrell G. Schlom
Department of Materials Science and Engineering, Cornell University, Ithaca, New York 14853, USA
DOI
https://doi.org/10.1063/5.0139622
Journal volume & issue
Vol. 11,
no. 4
pp.
041102
– 041102-12
Abstract
Read online
We report the use of suboxide molecular-beam epitaxy (S-MBE) to grow β-Ga2O3 at a growth rate of ∼1 µm/h with control of the silicon doping concentration from 5 × 1016 to 1019 cm−3. In S-MBE, pre-oxidized gallium in the form of a molecular beam that is 99.98% Ga2O, i.e., gallium suboxide, is supplied. Directly supplying Ga2O to the growth surface bypasses the rate-limiting first step of the two-step reaction mechanism involved in the growth of β-Ga2O3 by conventional MBE. As a result, a growth rate of ∼1 µm/h is readily achieved at a relatively low growth temperature (Tsub ≈ 525 °C), resulting in films with high structural perfection and smooth surfaces (rms roughness of <2 nm on ∼1 µm thick films). Silicon-containing oxide sources (SiO and SiO2) producing an SiO suboxide molecular beam are used to dope the β-Ga2O3 layers. Temperature-dependent Hall effect measurements on a 1 µm thick film with a mobile carrier concentration of 2.7 × 1017 cm−3 reveal a room-temperature mobility of 124 cm2 V−1 s−1 that increases to 627 cm2 V−1 s−1 at 76 K; the silicon dopants are found to exhibit an activation energy of 27 meV. We also demonstrate working metal–semiconductor field-effect transistors made from these silicon-doped β-Ga2O3 films grown by S-MBE at growth rates of ∼1 µm/h.
Published in APL Materials
ISSN
2166-532X (Online)
Publisher
AIP Publishing LLC
Country of publisher
United States
LCC subjects
Technology: Chemical technology: Biotechnology
Science: Physics
Website
http://aplmaterials.aip.org
About the journal
WeChat QR code
Close