Atmospheric Environment: X (Jan 2023)

The anti SARS-CoV-2 activity of nanofibrous filter materials activated with metal clusters

  • T. Thomberg,
  • H. Bulgarin,
  • A. Lust,
  • J. Nerut,
  • M. Koppel,
  • T. Romann,
  • R. Palm,
  • M. Månsson,
  • N.M. Flores March,
  • H. Junninen,
  • M. Külaviir,
  • P. Paiste,
  • K. Kirsimäe,
  • M. Punapart,
  • L. Viru,
  • A. Merits,
  • E. Lust

Journal volume & issue
Vol. 17
p. 100212

Abstract

Read online

Nanofibrous filter materials were prepared by electrospinning a solution of 28 wt% poly(vinylidene fluoride) in N,N-dimethylacetamide with and without the addition of 2 wt% AgNO3, Cu(NO3)2·2.5H2O or ZnCl2. X-ray diffraction, scanning electron microscopy with energy dispersive X-ray spectroscopy, inductively coupled plasma mass spectroscopy, thermogravimetric analysis, contact angle measurement, nitrogen sorption, and mercury intrusion porosimetry methods were used for the characterization of physical structure as well as the chemical composition of the electrospun materials. Particle filtration efficiency and antiviral activity against the SARS-CoV-2 alpha variant were tested in order to estimate the suitability of the prepared electrospun filter materials for application as indoor air filtration systems with virucidal properties. All filter materials prepared with salts demonstrated very high particle filtration efficiency (≥98.0%). The best antiviral activity was demonstrated by a material containing Cu(NO3)2·2.5H2O in the spinning solution, which displayed the decrease in the number of infectious virions by three orders of magnitude after a contact time of 12 h. Materials with the addition of AgNO3 and ZnCl2 decreased the number of infectious virions after the same contact time by only ∼8 and ∼11 times, respectively.

Keywords