Microplastic pollution of drinking water in a metropolis

Abstract

This study was conducted to identify microplastics (MPs) in drinking water from various sources in İstanbul that are known to pose potential health risks. One hundred drinking water samples were analysed. Samples were filtered with a glass filter (Ø: 1.0 μm). After filtration, microscopy was used, followed by SEM-EDS and ATR-FTIR identification to characterise MPs. Two shapes (fibers and fragments) and eight polymer types of MPs (ethylene propylene, neoprene, polyethylene, polyethylene terephthalate, polypropylene, polyvinyl chloride, polytetrafluoroethylene, vinyl chloride vinyl acetate copolymer) with sizes of 12–4892 µm (548 ± 777 µm) were detected. These MPs abundances ranged from 10 to 390 MP L−1 (134 ± 93 MP L−1). In the identification of MPs detected in filters by FTIR spectroscopy, bisphenol A, which is used in the production of various plastics and described as an important public health problem, was detected in 9.74% of MPs. Within the scope of the Sustainable Development Goals, UNEP has a specific objective of ensuring access to safe, affordable drinking water (SDG 6). With a clear statement, it should be emphasised that MPs are a significant barrier to the provision of safe drinking water, and a comprehensive plan for overcoming this barrier should be developed. HIGHLIGHTS At least 63.6% of drinking water is contaminated with MP.; Tap water is critical for microplastic contamination (100%).; PET, PVC, and EP are the three MPs found in water samples most frequently.; Bisphenol A was one of the contaminants identified in tap water samples.;

Keywords

• atr-ftir
• filtration
• microplastic
• sem-eds
• water