Simulation and experimental validation in outdoor conditions of a CPV system based on both pyramid and cone secondary optical elements

Abstract

This work deals with real conditions testing of two Fresnel lens-based optical concentrators for concentrator photovoltaic systems (CPV). Particular attention is paid to validate the performances of the secondary optical elements (SOEs), namely pyramid and cone, both made from highly transparent fused silica and mounted with a poly methyl methacrylate (PMMA) Fresnel lens as a primary optical element (POE). The effet of the focal distance of the POE on the main optical characteristics is analyzed by simulation and the corresponding results and behavior are discussed in details. Prototypes based on Fresnel lens having 75 and 100mm in diameter and pyramid- and cone-based secondary optical elements have been simulated, fabricated and tested. Optical and electrical characterization procedures are described in details. The optical efficiency, acceptance angle, spatial homogeneity of the output power and electrical performances of the fabricated CPV units are measured and are in a good agreement with simulation data. Results show that the pyramid-type concentrator gives the best optical and electrical performances. The electric efficiency achieved by the pyramid-based concentrators reaches 30% which make it able to reach the highest standards of CPV technology performances. A large acceptance angle of 1.35° is measured as one of the highest value reported in the literature for systems with pyramid as a SOE. A good agreement between simulation and experiment results has been obtained, confirming the performance expected from a CPV system having the same secondary optical element with a larger primary optical element.

Keywords

• Concentrator photovoltaic
• Fresnel lens
• Secondary optic
• Pyramid
• Optical efficiency
• Acceptance angle