Use of the OSCAR-Fusion V1.4.a code for a preliminary assessment of the ACP contamination within the main ITER water cooling circuit

Abstract

One of the main objectives of ITER is to produce 500 MW of power from a deuterium-tritium plasma for several seconds. This goal presents two inherent challenges: firstly, in-vessel components will require active cooling to remove the heat coming from the fusion reaction (i.e., mainly fast neutrons and alpha particles). Secondly, the materials exposed to the neutron flux will yield activated corrosion products (ACPs) in all primary cooling circuits of ITER. From a safety point of view, ACPs are one of the contributors to the Occupational Radiation Exposure (ORE), they represent a source of radiological waste and also contribute to the source term for accidental scenarios involving the loss of primary confinement. Therefore, ACPs assessment is key to estimate radiological impact for nuclear workers and the public. ITER nuclear safety engineers adopted OSCAR-Fusion v1.4.a code to assess the ACPs inventory in the Integrated Blanket ELMs and Divertor (IBED) cooling loop. This paper describes the selection of input data, the modelling of the circuits and the operational scenarios used in OSCAR-Fusion calculations. This study also examines the outcomes of such calculations, notably in terms of ACPs inventory, emphasizing the impact on the ORE and highlighting its driving parameters. Additionally, the paper offers recommendations for better ACPs management in the context of the ITER project and in accordance with the ALARA principle.

Keywords

• ITER
• ACPs
• OSCAR-Fusion