Research on Work Performance of Monolithic Precast Concrete Shear Walls with Post-Cast Epoxy Resin Concrete

Abstract

Precast concrete structures are popular in the building industry because of their high efficiency and environmental friendliness. In this paper, the U-type reinforcement ferrule connection technique was applied to study the seismic performance of precast concrete shear walls. Five shear wall finite element models and four shear wall specimens were prepared. Both experiments and finite element analysis were conducted to explore the impact of parameters on the work performance of precast reinforced concrete shear walls, such as the variety of post-cast concrete, the form of horizontal joints, and the buckle length of U-type reinforcements. On this basis, the mechanism of failure as well as the characteristics of hysteresis, ductility, and energy dissipation capacity were analyzed. According to the analytical results, the cast in situ reinforced concrete shear wall is inferior to the precast shear wall with post-cast epoxy resin concrete in terms of seismic performance. In addition, the specimen with a keyway on the horizontal joint interface outperforms the specimen without a keyway. With an increase in the buckle length of the U-type reinforcement, there is a rise in the sectional height and stiffness of the hidden beam at the bottom of the wall, while the horizontal load-bearing capacity of the wall is improved. However, its ductility and energy dissipation capacity are decreased. As revealed by a thorough analysis, the construction scheme most suitable for precast shear wall horizontal joints adopts epoxy resin concrete as the post-cast material, the buckle length of U-type reinforcements is approximately one-third the height of the horizontal joint, and there is a keyway at the interface of the joint.

Keywords

• monolithic precast concrete shear wall
• U-type reinforcement ferrule
• epoxy resin concrete
• work performance
• test
• finite element analysis (FEA)