Analysis of the Topology and Electromagnetic Characteristics of Novel Stator Partitioned Axial Flux Disk Generator for Vehicles

Abstract

Internal combustion engines emit high-temperature, high-pressure, and text high-speed exhaust gases, resulting in wasted energy and low thermal efficiency. In order to recover the available residual energy in the exhaust gas, this paper proposes a new topology of the text disk-type axial flux stator-excited doubly salient generator (AFSDSG) with partitioned stator suitable for high-temperature and high-speed operation. Based on the analysis of the above generator inductance characteristics, the influence mechanism of three text pole-slot structures on the induced electromotive force (IEMF) of the armature winding is clarified, the equivalent magnetic circuit method is used to analyze the influence of different winding arrangements on the text no-load performance of the generator, and the principles of text pole-slot structure optimization and winding arrangement are summarized. The finite element software is used to model and simulate different configuration. After focusing on the analysis of transient characteristics such as inductance, armature winding IEMF, and air-gap flux, it is concluded that different from the conventional text pole-slot structure and winding connection method make that only the overlapping area of the stator and the rotor changes linearly can produce a constant voltage, the winding arrangement of Winding Partition Excitation Span 2 has a high IEMF amplitude value and low harmonic content. Finally, the prototype of a three-phase 12/8-pole was trial manufactured and tested. The consistency of the simulation results and experimental results is verified the innovation and feasibility of the new topology proposed in this paper.

Keywords

• Disk-type generator
• axial flux
• pole-slot structure
• windings connection