Journal of Magnesium and Alloys (Aug 2024)

Versatile techniques based on the Thermionic Vacuum Arc (TVA) and laser-induced TVA methods for Mg/Mg:X thin films deposition-A review

  • R. Vladoiu,
  • A. Mandes,
  • V. Dinca,
  • M. Tichy,
  • P. Kudrna,
  • C.C. Ciobotaru,
  • S. Polosan

Journal volume & issue
Vol. 12, no. 8
pp. 3115 – 3134

Abstract

Read online

Magnesium and magnesium thin alloy films were deposited using a thermionic vacuum arc (TVA), which has multiple applications in the field of metallic electrodes for diodes and batteries or active corrosion protection. An improved laser-induced TVA (LTVA) method favors the crystallization processes of the deposited magnesium-based films because the interaction between laser and plasma discharge changes the thermal energy during photonic processes due to the local temperature variation. Plasma diagnosis based on current discharge measurements suggests an inelastic collision between the laser beam and the atoms from the plasma discharge. The morphology and surface properties of the obtained thin films differ between these two methods. While the amorphous character is dominant for TVA thin films, enabling a smooth surface, the LTVA method produces rough surfaces with prominent crystallinity, less hydrophobic character and lower surface energy. The smooth surfaces obtained by the TVA methods produce metallic electrodes with good electrical contact, ensuring better diodes and battery charge transport. Both methods allow uniform magnesium alloys to be obtained, but the laser used in the LTVA on the discharge plasma controls the added metal or element ratio.

Keywords