Interfacial thermal conductance of 7075 aluminum alloy microdroplets in contact with a solid at fast melting and crystallization

Abstract

Ultrafast nanocalorimetry, in combination with high-speed IR thermography, is used to measure the interfacial thermal conductance (ITC) of the thermal contact of metal microdroplets with a solid during fast melting (including laser heating). IR thermography and membrane nanocalorimetry were used to measure the temperature difference at the membrane/sample interface during the melting and crystallization of aluminium alloy (AA7075) microdroplets (20 μ m in diameter) over a wide range of heating and cooling rates (up to 10 ^5 K s ^−1 ). This is the first time ITC has been measured at such high heating and cooling rates with this new method. We found that the interfacial temperature difference reaches about 80 K during the solidification of microdroplets during laser heating. This result is significant for understanding various industrial laser-assisted processes. It has been established that ITC measured for AA7075 microdroplets gradually increases by an order of magnitude during melting in the range from the solidus temperature to the liquidus temperature of the alloy. This unusual behavior of ITC during melting can be important for understanding and optimizing laser-assisted additive manufacturing processes.

Keywords

• interfacial thermal conductance/resistance
• ultrafast nanocalorimetry
• thermography
• laser-assisted additive manufacturing