Characteristics and Simulation of Icing Thickness of Overhead Transmission Lines across Various Micro-Terrains

Abstract

The hazard of ice accretion on overhead power circuits is significant, yet predicting it is very difficult. The key reason lies in the shortage of sufficient observational data on ice thickness, and previous studies have also rarely taken into account micro-terrain and micro-meteorological conditions. In response to the challenge of simulating overhead line icing, this study introduces a new icing simulation technique that fully considers the effects of micro-terrain and micro-meteorology. For this technique, typical micro-terrains of overhead line areas are first identified by using high-resolution elevation data, and the icing thickness characteristics in different micro-terrains are analyzed. Subsequently, icing thickness simulations for different micro-terrains are conducted. The results indicate that during the icing process, the icing thickness ranges from 5 mm to 8 mm under three types of micro-terrain, namely, “uplift type”, “alpine drainage divide type” and “canyon wind channel type”, whereas the icing thickness is less than 5 mm in the “flat type” of micro-terrain. This finding suggests that the first three micro-terrain types facilitate icing on overhead transmission lines due to the condensation and uplifting effects of water vapor caused by terrain. However, flat terrain lacks the conditions necessary for water vapor accumulation and thus is not easy to form icing. The results are advantageous for the deployment of overhead power lines in intricate terrain. It is advisable to steer clear of regions susceptible to icing, and endeavor to install circuits in level territories whenever feasible. In addition, the simulated icing thickness under different terrains is in good agreement with the observations. Specifically, the correlation coefficient between simulated and observed icing thickness is significant at the 0.99 confidence level, and the deviations between them are within 0.5 mm. This signifies that the forecasting methodologies employed are dependable and possess significant implications as a reference for disaster prevention and mitigation efforts.

Keywords

• overhead transmission lines
• micro-terrain
• icing thickness
• simulation technique