C-Band Q-Switched Fiber Laser Using Titanium Dioxide (TiO 2) As Saturable Absorber

Abstract

We demonstrate a passively Q-switched erbium fiber laser using titanium dioxide (TiO2) as a saturable absorber. The TiO2 saturable absorber was fabricated as a polymer composite film and sandwiched between fiber ferrules. Q-switched pulsing starts with the assistance of physical disturbance of the laser cavity (by lightly tapping the cavity to induce instability) at 140 mW and lasts until 240 mW. The repetition rate increases with the pump power from 80.28 to 120.48 kHz. On the other hand, the pulsewidth decreases from 2.054 μs until it reaches a plateau at 1.84 μs. The Q-switched fiber laser exhibits two competing modes: at 1558.1 and 1558.9 nm as the pump power increases. A high signal-tonoise ratio of 49.65 dB is obtained.

Keywords

• Q-switched
• 2%22%2C%22default_operator%22%3A%22AND%22%7D%7D%7D"> TiO <sub xmlns:ali="http://www.niso.org/schemas/ali/1.0/" xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">2</sub>