Borehole damaging under thermo-mechanical loading in the RN-15/IDDP-2 deep well: towards validation of numerical modeling using logging images

Abstract

Abstract A wider exploitation of deep geothermal reservoir requires the development of Enhanced Geothermal System technology. In this context, drilling and stimulation of high-enthalpy geothermal wells raise technical challenges. Understanding and predicting the rock behavior near a deep geothermal wellbore are decisive to implement stimulation strategies to reach the couple temperature/flowrate target. Numerical modeling can contribute to enhanced stimulation processes thanks to a better understanding of impact of stress release, pressure changes and rock cooling in the near-wellbore area. In this paper, we use Discrete Element Method (code PFC2D, © Itasca Consulting Group), and more specifically bonded-particle model to capture the thermo-mechanical processes at metric scale. The application case corresponds to the beginning of thermal stimulation at Reykjanes in well RN-15/IDDP-2 (Iceland, IDDP-2 project and H2020 project DEEPEGS). A cold fluid is injected at a depth of 4.5 km where the rock temperature is above 430 °C and the well pressure is around 34 MPa. Since we have site-specific data and logging images after drilling, we attempt to link the simulations with the reality. The numerical results are confronted with incipient interpretation of logging images and with analytical solution to go towards validation of the modeling approach. Numerical results show breakouts and thermally and/or mechanically induced fractures consistent with the analytical solutions. Moreover, the sensitivity analysis on uncertain parameters yields important clues regarding some logging features as, for example, asymmetric damaging or caving.

Keywords

• EGS (Enhanced Geothermal System)
• Borehole
• Thermal stimulation
• Fracture initiation
• DEM (Discrete Element Model)
• PFC2D