Mechanical and Microstructural Characterization of Aluminium Alloy, EN AC-Al Si12CuNiMg

Abstract

Aluminum alloys have low density and good mechanical properties, making them suitable for the manufacture of mechanical structures where low weight is critical. However, when these alloys are subjected to elevated temperatures, their mechanical properties deteriorate significantly. The aim of this study is to investigate the effect of temperature on the mechanical properties of aluminium alloy, EN AC-Al Si12CuNiMg. For this purpose, an experimental investigation was performed at ambient and elevated temperatures on aluminium alloy samples prepared by casting. Tensile and hardness tests were carried out to characterize the mechanical properties of this material. Additionally, an optical microscope was used to examine the microstructures of this alloy. Finally, a scanning electron microscope was used to analyze the fracture modes of this material. The results show that the mechanical properties such as tensile strength, yield strength, and Young's modulus of this alloy dramatically decrease when the temperature exceeds 250C. The microstructural investigation reveals several factors that are detrimental to the mechanical properties of this alloy. This includes coarse-grained structures, micro-pores, and several intermetallic compounds. Furthermore, fractography reveals a minor cleavage-like pattern and micro-cracks on the fracture surface of all failed samples under various temperatures, indicating semi-brittle fracture mode.

Keywords

• mechanical properties
• metallography
• microstructure
• fracture properties
• aluminium alloy