Sensors (Feb 2022)

Individualization of <i>Pinus radiata</i> Canopy from 3D UAV Dense Point Clouds Using Color Vegetation Indices

  • Antonio M. Cabrera-Ariza,
  • Miguel A. Lara-Gómez,
  • Rómulo E. Santelices-Moya,
  • Jose-Emilio Meroño de Larriva,
  • Francisco-Javier Mesas-Carrascosa

DOI
https://doi.org/10.3390/s22041331
Journal volume & issue
Vol. 22, no. 4
p. 1331

Abstract

Read online

The location of trees and the individualization of their canopies are important parameters to estimate diameter, height, and biomass, among other variables. The very high spatial resolution of UAV imagery supports these processes. A dense 3D point cloud is generated from RGB UAV images, which is used to obtain a digital elevation model (DEM). From this DEM, a canopy height model (CHM) is derived for individual tree identification. Although the results are satisfactory, the quality of this detection is reduced if the working area has a high density of vegetation. The objective of this study was to evaluate the use of color vegetation indices (CVI) in canopy individualization processes of Pinus radiata. UAV flights were carried out, and a 3D dense point cloud and an orthomosaic were obtained. Then, a CVI was applied to 3D point cloud to differentiate between vegetation and nonvegetation classes to obtain a DEM and a CHM. Subsequently, an automatic crown identification procedure was applied to the CHM. The results were evaluated by contrasting them with results of manual individual tree identification on the UAV orthomosaic and those obtained by applying a progressive triangulated irregular network to the 3D point cloud. The results obtained indicate that the color information of 3D point clouds is an alternative to support individualizing trees under conditions of high-density vegetation.

Keywords