Evaluation of immiscible CO2 injection in high water production reservoir in the Pannonian basin

Abstract

Carbon dioxide (CO2) flooding is one of the most important and most used enhanced oil recovery (EOR) method because it does not only increase oil recovery efficiency but also is used as an underground CO2 storage. It is considered a very complex method as it involves knowing the fluid phase behavior with different CO2 concentrations. It should be noted that oil swelling (volume increase) with the dissolution of carbon dioxide has a significant effect on increase of oil recovery. When this occurs, a significant decrease in the viscosity of the oil is observed. In this study, a reservoir 3D simulation modeling approach was applied to evaluate immiscible and miscible CO2 flooding in a high WC reservoir. To reduce simulation time, the PVT composition was grouped into 5 fluid components. The 3-parameter, Peng-Robinson Equation of State (EOS) was used to match PVT experimental data by using the Schlumberger's ECLIPSE PVTi software. One-dimensional slim-tube model was defined using ECLIPSE 300 software to determine the minimum miscibility pressure (MMP) for injection of CO2. Beside this approach, an analytical MMP estimation was carried out using several correlations. Schlumberger Petrel software was used to set up a 3D simulation model of a static and dynamic model. Various scenarios of immiscible and CO2 injection have been simulated using ECLIPSE 300 software and these results have been compared.

Keywords

• co2
• enhance oil recovery
• miscible fluids