International Journal for Computational Civil and Structural Engineering (Jun 2022)

TEMPERATURE DEFORMATIONS OF PVC WINDOW PROFILES WITH REINFORCEMENT

  • Ivan Aksenov,
  • Aleksandr Konstantinov

DOI
https://doi.org/10.22337/2587-9618-2022-18-2-98-111
Journal volume & issue
Vol. 18, no. 2

Abstract

Read online

Modern window structures made of PVC profiles can experience significant temperature deformation during both winter and summer operation. This effect is not considered in the current engineering methods of PVC windows calculation, which causes a number of problems in their operation (freezing and blowing through the windows, the failure of fittings, etc.). The use of laboratory methods of testing windows for temperature loads is limited due to their labor intensity and the high cost of testing equipment. We propose to develop an engineering method for calculating the mechanical operation of PVC windows under the action of temperature loads, which can be used at an early stage of design. One of the stages of its creation is a theoretical description of the temperature deformation of a PVC window profile when it works together mechanically with a reinforcing core. The article describes the nature of the forces transmitted by the PVC profile on the core during thermal bending (the case of temperature deformation at negative outside temperatures is considered). It was proposed to decompose these forces into two components: longitudinal, caused by different values of temperature shrinkage of PVC profile and reinforcing core, and transverse, caused by thermal bending of PVC profile. Mathematical models have been developed to calculate both force components and temperature deformation of the profile at different numbers and spacing of attachment points. A physical model has been proposed for implementation in the numerical calculation program, which allows a more accurate description of the temperature deformation of a long profile. Calculation of the test problem according to the proposed methodology and by means of full-fledged three-dimensional finite-element modeling in the COMSOL Multiphysics program was performed. A comparison of the results showed a discrepancy of less than 10%. It was found that the key influence on the deformations of PVC window profiles with a reinforcing core will have characteristics of the outermost joints "PVC profile – reinforcing core", because the greatest forces arise in them under the action of temperature loads.

Keywords