Membranes (Jun 2023)

Carbonized Nickel Complex of Sodium Pectate as Catalyst for Proton-Exchange Membrane Fuel Cells

  • Kirill V. Kholin,
  • Aigul F. Sabirova,
  • Danis M. Kadirov,
  • Ayrat R. Khamatgalimov,
  • Mikhail N. Khrizanforov,
  • Irek R. Nizameev,
  • Mikhail V. Morozov,
  • Radis R. Gainullin,
  • Timur P. Sultanov,
  • Salima T. Minzanova,
  • Eugene S. Nefed’ev,
  • Marsil K. Kadirov

DOI
https://doi.org/10.3390/membranes13070635
Journal volume & issue
Vol. 13, no. 7
p. 635

Abstract

Read online

Sodium pectate derivatives with 25% replacement of sodium ions with nickel ions were obtained by carbonization to temperatures of 280, 550, and 800 °C, under special protocols in an inert atmosphere by carbonization to temperatures of 280, 550, and 800 °C. The 25% substitution is the upper limit of substitution of sodium for nickel ions, above which the complexes are no longer soluble in water. It was established that the sample carburized to 550 °C is the most effective active element in the hydrogen-oxidation reaction, while the sample carbonized up to 800 °C was the most effective in the oxygen-reduction reaction. The poor performance of the catalytic system involving the pectin coordination biopolymer carbonized up to 280 °C was due to loss of proton conductivity caused by water removal and mainly by two-electron transfer in one catalytic cycle of the oxygen-reduction reaction. The improved performance of the system with coordination biopolymer carbonized up to 550 °C was due to the better access of gases to the catalytic sites and four-electron transfer in one catalytic cycle. The (Ni-NaPG)800C sample contains metallic nickel nanoparticles and loose carbon, which enhances the electrical conductivity and gas capacity of the catalytic system. In addition, almost four-electron transfer is observed in one catalytic cycle of the oxygen-reduction reaction.

Keywords