Micromachines (Aug 2019)
Resonant Pressure Micro Sensors Based on Dual Double Ended Tuning Fork Resonators
Abstract
This paper presents resonant pressure micro sensors based on dual double ended tuning fork (DETF) resonators, which are electrostatically excited and piezoresistively detected. In operation, the barometric pressure under measurement bends the pressure sensitive diaphragm functioning as the anchor of DETF resonators and therefore produces eigenfrequency shifts of the resonators. Theoretical analyses and finite element analyses (FEA) were conducted to optimize the key geometries of the DETF resonators with enhanced signal to noise ratios (SNRs). In fabrications, key steps including deep reactive ion etching (DRIE) and anodic bonding were used, where sleeve holes were adopted to form electrical connections, leading to high-efficiency structure layout. Experimental results indicate that the presented micro sensors produced SNRs of 63.70 ± 3.46 dB in the open-loop characterizations and differential sensitivities of 101.3 ± 1.2 Hz/kPa, in the closed-loop characterizations. In addition, pressure cycling tests with a pressure range of 5 to 155 kPa were conducted, revealing that the developed micro sensors demonstrated pressure shifts of 83 ± 2 ppm, pressure hysteresis of 67 ± 3 ppm, and repeatability errors of 39 ± 2 ppm. Thus, the developed resonant pressure micro sensors may potentially function as an enabling tool for barometric pressure measurements.
Keywords