Hydrostatic stability of steel-slag porous asphalt mixture based on freeze-thaw cycle testing

Abstract

This study was conducted to investigate the hydrostatic stability of a steel slag porous asphalt mixture (SSPA) under freeze-thaw cycles in seasonal frozen soil areas and thereafter, compare its (SSPA) characteristic properties and advantages with a traditional porous asphalt pavement. In the study, the freeze-thaw stability of SSPA was tested through multiple freeze-thaw cycle splitting, scattering loss, and trabecular bending tests under various cyclic temperature water immersion conditions including quantitatively analyzing the SSPA volumetric changes. In addition, the scanning electron microscope (SEM) and energy dispersive spectrometer (EDS) tests were used to analyze the microscopic damage mechanism of SSPA after being subjected to various cyclic temperature water immersion conditions. The corresponding test results indicated that: (a) the long-term freeze-thaw cycles had significant adverse effects on the hydrostatic stability, physical/mechanical properties, and volume stability of SSPA; and (b) when the melting temperature was increased, both the hydrostatic stability and mass gain/loss ratio of SSPA decreased whilst the void ratio increased. On the other hand, the SEM and EDS results showed that an increase in the number of freeze-thaw cycles or melting temperature led to a corresponding increase in the width of the steel slag-asphalt transition zone. This resulted in a weakening of the mechanical connection and anchorage between steel slag and asphalt, as well as the destruction of their adhesion bond. However, the short-term freeze-thaw cycles had little effect on the hydrostatic stability of SSPA because the steel slag-asphalt interfacial strength was enhanced by short-term freeze-thaw cycles.

Keywords

• Steel-slag porous asphalt mixture
• Freeze-thaw cycle splitting test
• Scattering loss test
• Trabecular bending test
• SEM
• Hydrostatic stability