Energy analysis of a hybrid parabolic trough collector with a steam power plant in Jordan

Abstract

In this work, a hybrid system consisting of a parabolic trough collector and a steam power plant is proposed. The effect of utilizing the parabolic trough collector on improving the performance of the plant and reducing fuel consumption has been studied experimentally. This study was implemented on a lab scale hybrid energy system consisting of a parabolic trough collector unit incorporated into a biomass-oil shale fired steam power plant during startup conditions. To determine the performance of this lab-scale hybrid system, the efficiency of the parabolic trough collector standalone system has been measured and the flow rate of the system has been tuned to 0.31 L/min to obtain an efficiency of 10.2%. The biomass-oil shale fired power plant worked with superheated steam at 377 °C temperature and 0.6 MPa pressure. The thermal efficiency of the power plant was 12.6% with net output power of 6.3 kW without using the parabolic trough collector unit. It was found that the performance of the hybrid system has shown better efficiency than the standalone biomass fired power plant with the same fuel mixture ratio and steam flowrate. The fuel mixture consumed in the hybrid system decreased by 62.0% at starting up condition. This result may be extended to steady-state operating conditions by increasing the number of parabolic trough collector units utilized. Furthermore, the overall thermal efficiency of the hybrid parabolic trough collector power plant system may reach 33.3% during steady-state operation if 48 parabolic trough collector similar units were used. These parabolic trough collector units should be arranged in three parallel rows, each row of 16 units in series.