Buildings (Apr 2024)

Innovative Use of UHF-RFID Wireless Sensors for Monitoring Cultural Heritage Structures

  • Amedeo Gregori,
  • Chiara Castoro,
  • Micaela Mercuri,
  • Antonio Di Natale,
  • Emidio Di Giampaolo

DOI
https://doi.org/10.3390/buildings14041155
Journal volume & issue
Vol. 14, no. 4
p. 1155

Abstract

Read online

This paper reports a novel investigation in applying commercial Ultra High-Frequency RFID tags (UHF-RFID tags), which are widely used in logistics as sensing elements in civil engineering structures, particularly for monitoring out-of-plane displacements of brick masonry walls. Both laboratory tests and in situ experimental tests assessed the feasibility of the proposed application. Laboratory tests showed a very satisfactory response while the in situ experiments showed a weaker response. Nevertheless, the potential reliability of the proposed technique can be stated. The authors traced back the causes of the performance decrease to environmental interference, mainly due to the extensive presence of a rigid steel frame surrounding the out-of-plane loaded panels. Measurements of displacements, in fact, are obtained indirectly from the phase of UHF-RFID signals that strongly suffer from multipath generated by metallic surfaces. Despite some limitations, the proposed measurement technique permits a reliable and sustainable approach to the monitoring of structures. The use of commercial UHF-RFID wireless tags, in fact, assures easy and fast installation operations and assures the possibility of placing a large number of sensors over the structure with very low maintenance costs with respect to the more traditional monitoring techniques. Moreover, using very thin and small commercial UHR-RFID tags on cultural heritage structures can represent an opportunity for sustainable long-time monitoring with reduced costs. Overall, the results of this study are sufficiently satisfactory to be considered as the opening of new possible scenarios in wireless structural monitoring in the civil engineering field. The authors propose as future work to use UHF-RFID tags for the real-time monitoring of an existing masonry facade that, not being characterized by the presence of a steel frame, can potentially assure an adequate response and properly transmit the electromagnetic signal.

Keywords